Products Center
PA610 nylon resin for injection molding
Time:2022-08-23 11:35:49 Click:
描述
PA610 nylon resin for injection molding
PA610 is a special engineering plastic with high wear resistance and toughness;
Compared with Nylon 66 and nylon 66, nylon 610 is softer, with low water absorption rate, good low temperature resistance and size stability, oil resistance, chemical resistance, good electrical performance, and self -extinguishing materials.
Various injection molding parts such as high -resistance and stretching requirements.
| NO. | ITEM | TEST METHODS | TEST CONDITION | UNIT | Typical value | ||
| Ⅱ | |||||||
| Physical Propertids | |||||||
| 1 | Density | GB/T1033 | 23ºC | — | 1.06 | ||
| ISO1183 | |||||||
| 2 | Molding shrinkage | GB/T 15585 | ‐ | % | 1.1 | ||
| 3 | Shore hardness | GB/T2411 | ‐ | D | 82 | ||
| ISO2039 | |||||||
| 4 | Melting point | GB/T 4608 | ‐ | ºC | 215 | ||
| ISO3146 | |||||||
| Mechanical Propertie | |||||||
| 5 | Tensile strength | GB/T 1040 | 50mm/min | Mpa | 59 | ||
| ISO527 | |||||||
| 6 | Nominal strain at break | GB/T 1040 | ‐ | % | 168.2 | ||
| ISO527 | |||||||
| 7 | Flexural strength | GB 9341 | 2mm/min | Mpa | 77.1 | ||
| ISO178 | |||||||
| 8 | Flexural Module | GB /T9341 | 2mm/min | Mpa | 1881.7 | ||
| ISO178 | |||||||
| Remark | |||||||