Zhongjunyi PA6 -ZJYRG20 is 20% glass-fiber-reinforced polyamide 6, developed as a reinforced flame-retardant injection-molding compound for electrical parts requiring V0 performance, useful stiffness and dimensional control. It is supplied as pellets for injection molding and can be discussed for custom color, performance balance and project-specific validation.

Product Information

PA6 GF20 FR V0 Physical Property Data

The following typical values are taken from the current Zhongjunyi PA6 GF20 FR V0 datasheet. They support initial material screening; final part approval should use the confirmed production grade, molded samples and project-specific testing.

Download the PA6 GF20 FR V0 datasheet (PDF). Values are typical and are not, by themselves, a final part-design specification.

Applications

• Terminal blocks, sockets and multi-pin connector housings
• EV charging connector shells and cable-end components
• LED driver housings and flame-retardant lighting parts
• Electrical control boxes and appliance electrical supports
• Sensor housings and industrial low-voltage components

Application suitability depends on load, temperature, moisture exposure, chemical contact, wall thickness, fiber orientation and the validation standard. Share the drawing and operating conditions so Zhongjunyi can compare this grade with lower or higher glass-fiber options.

Processing and Part-Design Considerations

• Dry the material and control moisture according to the approved grade TDS before molding.
• Review gate position and flow direction because fiber orientation affects stiffness, shrinkage and warpage.
• Use practical radii and uniform wall transitions to reduce stress concentration in reinforced parts.
• Validate weld lines, insert areas and critical dimensions with molded samples from the production tool.

Why Choose Zhongjunyi Engineering Plastics Manufacturer?

• Engineering-plastic development and manufacturing since 2005
• Independent R&D, production and sales of functional polymer materials
• ISO 9001, ISO 14001, ISO 45001 and IATF 16949 certified management systems
• In-house testing equipment for incoming, process and finished-product control
• Export experience in more than 30 countries
• Material support for automotive, electronics, home-appliance and industrial parts

For a faster recommendation, send the part application, drawing, operating temperature, load, color, compliance target, annual demand and the problem with the current material. Contact Zhongjunyi for a TDS, sample and quotation.

Frequently Asked Questions

Q: What is PA6 GF20 FR V0 used for?
A: PA6 GF20 FR V0 is selected for injection-molded parts that need higher stiffness and dimensional control than unfilled polyamide 6. Typical uses include terminal blocks, sockets and multi-pin connector housings, ev charging connector shells and cable-end components, led driver housings and flame-retardant lighting parts.

Q: Can Zhongjunyi provide a sample and TDS for PA6 -ZJYRG20?
A: Yes. Zhongjunyi can provide the current TDS, sample material and molding discussion for PA6 -ZJYRG20. Please share the part, annual demand, color and validation requirements.

Q: Can the color or formulation be customized?
A: Color matching and formulation adjustments can be discussed according to the application, processing method, compliance target and order quantity. Final properties must be confirmed on the selected production grade.

Q: What should be checked before molding PA6 GF20 FR V0?
A: Control moisture before molding, review fiber orientation and gate position, and validate shrinkage and warpage on the actual tool. Processing conditions should follow the approved grade TDS and trial results.

Q: How do I request a material recommendation and quotation?
A: Send the part application, operating temperature, load, wall thickness, color, compliance needs, target quantity and current material issue. Zhongjunyi will recommend a starting grade and prepare a quotation.